HSGQ-X100W3 GPON ONU with WiFi – Compact WiFi ONU Device for FTTH and FTTB Networks

Not every subscriber premises needs four Ethernet ports and a dual-band radio. For a large portion of residential FTTH deployments — a single household, a small flat, a home office — what is actually needed is straightforward: one fast wired port, reliable WiFi, and a fiber optic router in Kenya that the subscriber can set up themselves without a support call. The HSGQ-X100W3 is exactly that device. A compact GPON ONU with WiFi, it combines a single gigabit Ethernet port and a 2.4GHz 802.11n wireless radio into a slim, low-power unit that connects directly to your PON network — GPON or EPON, automatically — and delivers broadband to the home from the moment it is plugged in.

What Makes the HSGQ-X100W3 the Right WiFi ONU Device for Lean Deployments

The X100W3 is designed with one thing in mind: doing the essential job well, without unnecessary bulk or cost. Where the X130W suits subscribers who need multiple wired connections alongside wireless, the X100W3 is purpose-built for premises where a single gigabit port and solid 2.4GHz coverage is everything that is needed. For ISPs rolling out FTTH to hundreds or thousands of residential subscribers, that distinction matters — smaller device, lower unit cost, simpler installation, and a tidier premises footprint.

Like its larger sibling, it runs on XPON architecture — meaning it auto-detects whether it is connected to a GPON or EPON OLT and configures accordingly. You carry one SKU, and it works everywhere across your network. Full remote management via TR-069, OMCI, OAM, and a web interface means provisioning, monitoring, and remote software upgrades are all handled without dispatching a technician to the subscriber’s door.

Key Features of the HSGQ-X100W3 GPON ONU with WiFi

• XPON Auto-Adaptive: Works on both GPON and EPON networks automatically — one device type covers your entire PON infrastructure, regardless of OLT vendor.
• 1 × Gigabit Ethernet Port: Single 10/100/1000M RJ45 port with auto-negotiation and auto MDI/MDI-X — fast enough for any residential or SOHO broadband service.
• 2.4GHz 802.11n WiFi: Stable single-band wireless with multi-room coverage, suitable for everyday home and small office use without a separate router device.
• SC/UPC and SC/APC Compatible: Works with both fiber interface types commonly deployed in FTTH distribution infrastructure across East Africa.
• 20km PON Reach: Connects reliably to the OLT across the full distance of a standard passive optical network — no signal amplification required.
• Dynamic Bandwidth Allocation (DBA): Optimises upstream bandwidth in real time across all ONUs on the PON segment, maintaining consistent service quality for every subscriber.
• Full Management Stack: Web UI, Telnet, TR-069, OMCI, and OAM support — including remote software upgrades, power-off fault alerts, and ONU auto-discovery.
• IPv4/IPv6, QoS, VLAN, PPPoE/DHCP/NAT: Everything an ISP needs for subscriber management, traffic prioritisation, and service configuration is built in.

Technical Specifications

Where This Fiber Internet Router in Kenya Performs Best

• Residential FTTH: The compact, single-port-plus-WiFi design is the cleanest fit for standard household deployments where subscribers need internet access, not a full networking setup.
• High-Volume ISP Rollouts: The combination of XPON auto-detection and TR-069 remote management makes the X100W3 easy to provision at scale — configure remotely, ship to site, plug in. Minimal technician time per premises.
• FTTB Individual Units: In multi-tenant buildings where each flat or office unit gets its own ONU, the X100W3’s slim form factor and single-port design keeps installations tidy and hardware costs per unit controlled.
• Backup or Replacement CPE: A cost-effective, standards-compliant device for ISPs who need to maintain CPE stock for quick subscriber replacements without carrying large inventories of expensive hardware.

Why Choose ECA Networks for Your GPON ONU with WiFi in Kenya?

Sourcing CPE for an FTTH rollout in Kenya is not just about finding the cheapest unit on the shelf. The device needs to register on your OLT, provision cleanly via TR-069, and keep working in a home environment without generating support calls. At ECA Networks, we supply the HSGQ-X100W3 to ISPs and network contractors who have already learned that lesson the hard way with lower-grade alternatives. These are field-tested, standards-compliant devices that do what the specification says.

We stock both the X100W3 and the HSGQ-X130W — so whether you need a lean single-port WiFi ONU or a multi-port model for more demanding premises, we have the right device. Talk to our team about OLT compatibility, bulk pricing, and what it takes to get your next service area live on time.