LC/UPC to SC/UPC Simplex Fiber Patch Cord (1 Metre) – Clean, Low-Loss Hybrid Connectivity

In a world where most patch cords are built for same-to-same connector types, mixed hardware setups are the headache nobody plans for — until they are standing in a cabinet trying to connect an LC-style SFP module to an SC patch panel with nothing that fits. The LC/UPC to SC/UPC Simplex Fiber Patch Cord exists specifically to solve that problem. At 1 metre long, this hybrid patch cord bridges the gap between two of the most widely used connector standards in networking, delivering a clean, low-loss signal path without compromise. It is a small cable with a very specific job — and it does it exceptionally well.

What Is an LC/UPC to SC/UPC Simplex Patch Cord and When Do You Need One?

A simplex patch cord carries a single fiber strand — as opposed to duplex, which carries two. This makes it the right choice for BiDi (Bidirectional) transceivers, where a single strand handles both transmit and receive using different wavelengths. It is also commonly used in FTTH deployments to connect an ONT or ONU device to a wall outlet, and in high-density data centre environments where keeping cable runs short and clean is a priority.

The hybrid LC-to-SC configuration is what makes this cord particularly useful. The compact TIA/EIA-compliant LC connector plugs directly into SFP or SFP+ module ports on switches and transceivers, while the SC connector on the other end terminates into patch panels, wall plates, or media converters — two different worlds, connected by one reliable cable.

Key Features of the LC/UPC to SC/UPC Simplex Fiber Patch Cord

• Hybrid LC to SC Design: Bridges LC-port equipment to SC-based infrastructure without adapters or additional hardware — keeping your rack clean and your connection direct.
• UPC Polish on Both Ends: Ultra Physical Contact ceramic ferrules on both connectors deliver a superior end-face finish for consistent, low-reflection signal transmission.
• Simplex Single-Strand Configuration: Purpose-built for BiDi transceivers and applications where a single fiber handles the full communication path.
• LSZH Jacket: The Low Smoke Zero Halogen outer jacket is safe for indoor, plenum-adjacent, and enclosed environments — in the unlikely event of heat exposure, it produces minimal smoke and no toxic halogen gases.
• 1-Metre Length: Short enough to keep cabinet runs tidy and cable management clean, without the excess slack that clutters high-density enclosures.
• Factory-Tested Performance: Every cord is tested for insertion loss and return loss before leaving the factory, meeting TIA/EIA standards at ≤0.3 dB and ≥50 dB respectively.

Technical Specifications

Where the LC to SC Simplex Patch Cord Performs Best

This is not a general-purpose patch cord — it is a precision tool for specific connectivity scenarios. Here is where it earns its place in your kit:

• BiDi Transceivers: Single-strand bidirectional communication requires a simplex cord. Pair this with a compatible BiDi SFP module from ECA Networks for a complete, matched solution.
• FTTH Installations: Connecting ONT and ONU devices at the customer premises to SC-terminated wall outlets or distribution boxes.
• Telecom & Data Centres: High-density environments where 1-metre cords keep patching neat, traceable, and easy to manage — particularly in mixed-vendor hardware setups.
• Industrial & Enterprise Networks: Reliable links between media converters, industrial switches, and sensors where space is limited and performance cannot be compromised.

Why Source Your Fiber Patch Cords from ECA Networks?

There is a wide range of fiber patch cords online, and a lot of them look identical. The difference shows up in the loss readings — and in how long they last. At ECA Networks, every patch cord we stock is sourced from manufacturers who test each unit individually, not just batch-sample. That means when you plug in an LC/UPC to SC/UPC simplex cord from us, it performs to spec — no surprises, no re-patching, no wasted troubleshooting time.

We supply fiber patch cords, passive components, and active networking hardware to ISPs, system integrators, and enterprise IT teams across East Africa. Our stock covers the full range of connector types, lengths, and fiber modes, so whether you need a single 1-metre hybrid cord for a quick fix or a bulk order of singlemode patch cords for a data centre rollout, we have what you need — and we can get it to you fast. For further reading on fiber patch cord standards, the IEC 61754 standard defines the interface requirements for fiber optic connectors.